Supercharged fuel injector flow rate

Does anyone know what the flow rate of the supercharged fuel injectors is? The online manual I have doesn't have any specs.

 

The injector should have a number on it. The InjectorPlanet site has a look up tool which will tell you what it is supposed to flow.

https://www.injectorplanet.com/pages/fuel-injector-how-to

 

I have been looking in the Japanese service manual, and I have yet to find a flow rate.

 

Thanks for looking. I'll have to pull them and flow test them at my buddy's shop. This is part of the lead up to putting a stand alone ECU and I need the flow rate to set that up.

 

So you're keeping the project Sambar then. Nice.

 

For a bit more. The stock ECU isn't playing nice with the turbo set up still. It doesn't cut out nearly as much but will still do it occasionally. I've also found with the stock timing map I'm not really able to get the full power I could with the now having an intercooler. So will be switching to a wasted spark ignition and ditching the distributor. Then along with all that I'm doing an engine rebuild and going to the 9.8:1 NA pistons. With the intercooler I can run a lot higher compression. That will give a nice bump in power everywhere.