[SOLVED] Turn Signals not Working - 1991 Acty w/A/C

Hi!
I just picked up a 1991 Acty w/A/C. It's been running great.

Turn signals worked on the way to Publix. Now they do not. No exterior nor interior lights.
1. Fuse looks ok
2. Headlights work

Ideas? Thanks!

 

Scit,
Take out your tester and get crackin! Start by checking power sources. Sometimes a fuse looks good and it's not! You can check a fuse with a test light, while the fuse is intact! Hence the small metal dots, or tabs on top of the fuse, at each top/side. See if you have power to the fuse and out! So if both turn signals are out, and the fuse is good, is there a relay/flasher in the circuit? Maybe someone with an acty can respond. Do you have emergency blinkers? I would think, that their on the same circuit!
Limestone

 

It was the flasher. Picked up a new one, plugged it in, and now we're blinking! Thanks!

 

Had the same issue a few years back in my Subaru, tried everything, then found a relay way down stream buried behind the dash had to , pull off most of the plastic to get to it.

 

On my Daihatsu, it's right there, next to the steering column, on the fuse panel! Easy access!
Limestone

 

Sciteach, where is the relay? I need to change mine and can't find it. I looked at the diagram and no luck. Thanks for the help. For my 1994 Acty truck SDX

 

for the future, here is a pic Casey M Pinch made https://minitrucktalk.com/threads/honda-acty-blinker-relay-location.20690/
quote: I found the turn signal relay. Remove the shelf panel below the glove box, passenger side. Then remove the bolt holding the wiper relay and turn signal relay. See photos. Hope this saves someone some time!