1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Carb Tuning Techniques

Discussion in 'Mitsubishi Minicab' started by Don-in-Japan, Dec 13, 2008.

  1. Rong

    Rong New Member

    I bought a Cushman van with the 4g82 I found it says Mikuni on carb. What model is the carb? I need some gaskets.
     
  2. chris allen

    chris allen Member

    can you rebuild 3g81 carb text me 3102835316
     
  3. chris allen

    chris allen Member

    3g83 engine for sale and 4x4 transmission 3102835316 text me
     
  4. chris allen

    chris allen Member

    Can you still rebuild carb 3102835316
     
  5. Jim Harrison

    Jim Harrison New Member

    I have a 1999 Cushman Haulster with a Mikuni carburetor that needs to be overhauled (it's flooding); and a 1998 White truck with a different Mikuni that the secondary jet is not working-it is not pulling the slide up-it falls on its face after acceleration. I've tried 2 carburetor repair shops here in the San Diego area and they are unable to the repairs.

    Does anyone know someone who can overhaul these carbs? Seems like they are a specialized animal. Thanks for any help or advice.

    -Jim
     
  6. silver tiger

    silver tiger New Member

    Do you have any new carb piston valves MD617359 for a Mitsubishi U15l 3g81 left hand drive ?
     
  7. MTCushman

    MTCushman New Member

    Dan, not sure if you are still on here.. But I have a Cushman white truck left hand drive 4g82.. It is stamped under the seat 60B229T. I am trying to find a new or rebuild kit for the carb... Also I don't know what year it is. Any help with that would be much appreciated.. metspt@yahoo.com.
     
  8. marty meyer

    marty meyer New Member

    Does anyone by chance have the images that were originally posted on this. They don’t show up
     
  9. Don-in-Japan

    Don-in-Japan Member

    Marty, look at one of my posts a few responses down from the beginning of the thread. They are there.
     
  10. marty meyer

    marty meyer New Member

    Thank you. I must of overlooked it. I’m trying to get my 1990 mini straightened out. I believe i have vacuum issue an possibly timing issue.
     
  11. Don-in-Japan

    Don-in-Japan Member

    I think the forum software updates clear out the older pics. I've re-posted them at least 3 times.
     
  12. marty meyer

    marty meyer New Member

    Thank you I appreciate it
     
  13. Boneyard1776

    Boneyard1776 New Member

    Do you still rebuild these carbs? If so. I am interested.
     

Share This Page