turns out its an adjustment to allow the inside break pad to "float" a bit.. its weird.
turns out my issue is not the carb... but rather the ignition source, i guess it doesn't function so well in the cold. new one on order!
on the lower back side of a brake caliper there are 2 bolts. 1 bolts the caliper to the vehicle, the other does what?? is it some sort of...
anyone have a written copy oh how to tuned the carb? im having issues in this department and any info would be great.
if i use my fingers to close the choke valve the truck will start fine, im considering a manuel choke but have no ide how to go about it... or i...
so I've cleaned out the area that the coolant lines go, still similar issues, I believe its has everything to do with the choke(I did find and...
the choke flap does move easily if I put finger pressure on it. I will clean and lube the spring area and open up that coolant line and see if...
ive purposefully adjusted the screw all the way back , then all the way opposite(it came out) this had NO effect on the valve., both the idle and...
so it warmed up to -3C and I replaced the spark plugs and sprayed a little either in each cylinder before putting the plugs back in. started up....
ya im checking for water from condensate in the tank, already added gasline antifreeze, and in a couple days it'll be +4C (4 degrees above...
e-mail me at sjp150@hotmail.com i'll send it to ya via e-mail.. im quick to reply, a day or 2 at most... sjp 1 5 (zero)... not o(oh)... :D
awesome idea will look at that. thanks Update: looked.. there was some ice buildup on the lower terminal point, not sure how water got in...
so. I drove to work without any issues sputtering or anything of the sort. plugged in the truck(inline coolant heater and oilpan heater). after...
Separate names with a comma.