Found this *great* video on YouTube. It explains all of the screws! [MEDIA]
I'm joining this thread in case someone is looking for any help with running and idling, maybe they can just find this one. My problem is that...
I've never seen this happen before (oil drain plug getting stuck). I'd first try penetrating spray (not WD40). If that didn't work, I'd removed...
Sounds like an S83P. Mines an 94 and an S83P model.
IIRC, mine was under the seat towards the center cross member next to the front firewall at the top and just under the lip of the edge. It was...
Decided that I would try to remove the wheel bearing nut. Although I've never seen this before, removing this was the key. Once that was removed...
The WD40 helped loosen the adjusted. Adjusted them all the way in. Heated again. No progress. Any suggestions on this?
Decided to put Wd40 Rust Release in the hole all the way around to see if that would break some of the rust. My guess is the lip of the drum on...
Depending on your size and whether you typically carry a passenger, you might want to go with 300s. I started with the 259s, but this was not...
I have some stubborn brake drums that don't want to come off. I've hammered and torched but one slight movement. Anyone have another trick?
Could it be the alternator is not fully functioning and therefore not charging all the time? Just an idea.
There seems to be a flow circuit of some kind. If you empty the rad you'll see that it won't run. I don't know how this works, but when my rad...
I used the tow hook locations to mount the grille guard and winch mount I built. Could you use the same mounts? If the weight isn't too much, it...
Those are definitely aftermarket shock, although I can't tell by looking if they are 250 or larger. I assume the noise is coming from the front...
Separate names with a comma.