The manuals that came with my motorcycles gave me reason to believe the Sambars were probably sprung for someone the size of the average 130#-155#...
I still haven't installed new rear springs yet, but I did do a little work on correcting the camber problem. I inserted some 1" spacers to help...
Sorry to leave you hanging for sooo long. I had a shop test my springs and he called them a light 200# spring. I measured the spring I.D. and...
I installed Eibach springs as I thought the diameter fit the spring seats better than the commonly used coilover springs. I have a '92 4wd Dump...
Well my paperwork did have the date correct then, it was 'penciled' in 12/92. Thanks for the confirmation. I don't believe my housing looks...
Both hoses are new. I replaced the larger one first only to discover I still had a leak. So I replaced the smaller one and even after slipping...
Hope this is the correct #, it is what's listed on my paperwork as the VIN - KS4-141184. What year is my truck? I have conflicting dates on it....
I located a water leak on the top part of my engine but don't know what the part is. I think it is part of the thermostat housing but I'm not...
Steel would wear too well, wearing out the other components. Bronze would have been good, but I was having difficulty finding one with the...
Solution? I was determined to find a bronze bushing that would take the extra play out of the shifter mechanism. Local farmers coop/Ace Hdw....
What is between #3 & #4 in the picture on the carb? Bowl vent nipple? Harold
Looks like the only thing it lacks is corner bracing or at least gusseting the corners. Are you SURE you're building it strong enough? :rolleyes:...
Try loosening the bleeder screw to see if that relieves pressure on the brake shoes. This may or may not apply to your truck but I've noticed...
Either way screws up the camber. I lifted mine with springs. I hope to space the front suspension down enough to get the camber back closer to...
Separate names with a comma.
