Or you could just get a steering wheel with a smaller diameter..... or cut off the bottom of the steering wheel. Old hot rods used to have little...
My 91SP83 Hijet now sometimes makes that grinding sound (like you would get if you turned the ignition key while the motor is running) when...
I'm having a similar problem with my S83P Hijet. I ran it a lot this summer with no problems, then put it away until a few weeks ago. Would not...
Does anyone know what the best size/part number would be for a 1991 S83p Hijet rear shock absorber (with 2" lift)? Is 20851 the right one? I'm...
I guess I'll give one more attempt at locating it where the kids were playing before the lawn mower finds it. I have to keep the cab locked...
yes, all is well with the 4WD assuming I can find the little cap on port I wrongly put the hose the first time. My kids were playing in the cab...
4WD working now!!!! Thanks for all the help! Aaron, that photo saved the day! I took out the 10mm wrench, looked at the cluster, finally figured...
Aaron, initially I was having trouble interpreting your description of the correct port for the vacuum hose. Eventually the thing that I thought...
I soldered in a 4" extension to the separated wire (most definitely a ground wire, since it was connected to a bolt going into a solid casting)...
I'll be happy to replace the hoses... but I need to figure out where the free end of one of them is supposed to plug into. I haven't located a...
trying to sort out the front differential vacuum servo mysteries After I learned what I should look for first, I found a post by fupabox that...
Thanks, I'll go out and try to get oriented and look for the vacuum servo and take some photos. It would be very convenient and probably cheap if...
Another mini truck owner friend came to visit me yesterday and we went for a ride in my 91 S83p through my woods on my logging trail the day after...
Separate names with a comma.