1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Limited Slip Diff. Kit

Discussion in 'General Truck Info' started by Allan, Jun 30, 2008.

  1. firejonny89

    firejonny89 Member

    Well then ur just full of info
     


  2. Hey John,

    I didn't read every post on this but if you're looking for diff lock I think you could just swap rear axle's with a DD51T that has diff lock and you'd be all set, it's the exact same truck and diff lock was pretty easy to find on the 90s models.
     
  3. firejonny89

    firejonny89 Member

    I have a diff lock sitting on the porch right now needs sanded down and a fresh coat of paint lol
     
  4. there ya go!
     
  5. kjohn115

    kjohn115 New Member

    I came across this thread on a UK daihatsu forum http://www.daihatsu-drivers.co.uk/node/12129 and this thread here http://184.172.194.66/~wheels12/wheels_forum/index.php?topic=119605.0 I have not phoned them myself but this might be what you are looking for http://www.phantomgrip.com/
     
    Last edited: Feb 7, 2013
  6. kjohn115

    kjohn115 New Member

    I called Phantom grip and they sent me a diagram of the measurements they need. They also said they would need a photo of the differential and they would see if they had one on the shelf that matched the dimensions needed or make it from scratch. The starting price is $200 and went up depending on model of limited slip and type of diff. diff.JPG
     
  7. firejonny89

    firejonny89 Member

    Good news let us know how it goes
     
  8. spaner

    spaner Well-Known Member

    For sure,
    A complete kit for a few hundred bucks could make a lot of guys happy.
    Especially for the front diff.
    I still say the Jamar is the way to go but, I'd check out videos to the contrary...


    http://www.youtube.com/watch?v=nxxcCF8bWh8


    ...
     
  9. firejonny89

    firejonny89 Member

    Yea that's what I'm going with the jamar :D
     
  10. muddy moose

    muddy moose Member

    I am interested to know if you have a front limited slip for 94 carry. Or locker. Although I would rather have the limited slip. We have miles and miles and hundreds of miles of terrain like spanner shows in his video. A limited slip would save me some foot work hahaha. Thanx
     
  11. kjohn115

    kjohn115 New Member

    Phantom grip will make the limited slip kit for you they just need your differential measurements as described in this diagram View attachment 12942 and a picture of your differential. They will then either match your dimensions to an existing off the shelf limited slip kit or build you one from scratch to match your specific differential dimensions.
     
  12. muddy moose

    muddy moose Member

    Awesome!! Thanx!!
     
  13. braeden heberlie

    braeden heberlie New Member

    Are these kits still available
     
  14. KCCats

    KCCats Active Member

    I would like to send you my front chunk as well as the rear from my 91 DB51?
    Is it possible, yet?
     
  15. Wheelie

    Wheelie Member

    The original guy who was hand making these stopped doing it. Most likely because people were being Aholes and debating its function instead of just moving on to something they like. Anyways, I just put in an inquiry to Phantom Grip so i will let yo know what I find.
     
  16. KCCats

    KCCats Active Member

    Yes Please keep me updated!
    Do you know anyone who will do my Carb?
    I have a kit on its way but???
     
  17. Wheelie

    Wheelie Member

    I inquired about adding a locker conversion to my 95 carry DD51T from a company called Phantom Grip. Here is their response.

    "This model seems so similar to the DB series.
    Do you happen to have access to the differential?
    We just need some info from the diff to see which part # exactly it is.

    Let me know if you do have access to the diff and I can send you a spec sheet of what we need."

    There you have it. I am wondering if anyone has access to a differential out of one of our trucks where we could get part numbers? Any help would allow us guys without lockers to easily add them without buttons or air lines. If not I will take mine apart but was hoping someone here would have that information? Lets do this guys!
     
  18. harley rose

    harley rose Member

    Hey Wheelie : Have you been able to move forward on a LS / Locker option ???
     
  19. KCCats

    KCCats Active Member

    Sounds like they have one for the DB51's?
     
  20. KCCats

    KCCats Active Member

    I am about to get into mine again.
    Any luck on a Locker or ?
     
  21. mtnxtreme

    mtnxtreme Member

    Last edited: Jul 9, 2019
  22. dale hynes

    dale hynes Member

    Where do I get them? Can you tell me some details about them and how they work?
     
  23. KCCats

    KCCats Active Member

    I am still interested for the rear of my 91 Carry
     
  24. Jigs-n-fixtures

    Jigs-n-fixtures Well-Known Member

    Traction concepts has kits on their website for most of the minitrucks.

    Dale, and KC, please go to the blue filed at the top of the page, and follow the dark blue link to add information on your rig to your signature.

    It really helps when folks need advice for your truck.

    Thanks, Jigs.
     

Share This Page