96 Suzuki comes in two bolt patterns. 4x100 and 4x115. you will need to measure to be sure. I have one in 4x100.
Stevens right. I knew the older (90-94) Suzuki's came with 4X115 but always thought the change was in 98. I found out the hard way that this is not true. I have found one in a 97 was not aware there were some in a 96 as well. Ditto on measuring to make sure. Jeff
Ok, to clarify the bolt patterns are 4x100 or 4 x 114.3 NOT 4 x 115 115 rims will fit with a gentle elongation of the bolt holes, but will not bolt right on. Enjoy!
Wow, then there are 3 different bolt patterns. However it seems all of the 114.3 trucks went to Canada, and all the 115 trucks went to the USA. Neat!
Does anyone know where the tire iron is hidden? I've found the jack and jack handle but assume there's a tire iron somewhere? thanks.
Mine didn't come with one that I know of. One would think it would be provided. I've heard of some being in the glove box. Kinda like a socket.
Sorry I can't help either with regards to a tire iron. My zuki came with a jack and handle but no wheel nut wrench. Heck I can't even find a bracket that looks like it may have held the wrench. z
Thanks, gentlemen Same here. Looked all over. Oh well, thanks for your help. Zardoz? Fan of the film?
For the lug wrench I usually get a Dodge caravan one from the wreckers..they have a nice design where they fold back into the handle and have a long reach..as long as your lug nuts are the same size.similar to this http://www.americanpartsdepot.com/images/141 4200A.JPG
I have the 4x115 on my 96 carry-all. I went with black alluminum rims and had to go to ezacessorry.com to get 12x1.25lug nuts long enough to tighten the wheel on.
I found my tire iron "lug wrech" and half of a tool kit in the under bed tool box. The kit looks like one of those cheap ones they put in with your atv and motorcycles.
I have a 10lbs onboard co2 tank regulated to 125psi. Air hose fits behind driver seat, Impact and sockets stuffed in the cargo box
no... 4x100 or 4x114.3/115... basically all of the 114.3/115 will fit, no slotting, just put them on... use a measuring tape to measure from the CENTER of one stud to the CENTER of the one directly accross from it... that will tell you what it is for sure... http://www.mrt-wheels.com/boltpattern.html
Bolt patterns 1994 Carry For what its worth I am shopping around for tire and wheel combos right now and at one of the shops they used a guage for checkinf my pattern. It was a 4X100 and that severly limits my choice of after market wheels. I have been told that 13" Geo wheels will fit the bolt pattern. Do any of you know if that is true? Binder66
There are LOTS of 4x100 wheels out there including most 4 bolt wheels from any VW or Japanese car from the last 30 years. You do have to pay attention to the center hub diameter. Try a search for "4x100" as I know there have been many discussions on this. Good luck and welcome!
New to the mini trucks but from some reading I've found some folks saying that 4 on 4 is the same as 4 on 100. The exact measure of the 4 on 4 is 101.6 so I'm guessing that it'll be pretty darn close. Any thoughts on this?
Yeah... I don't recommend it. Have done it. They do fit but its not centric. If you do use 4x4 in place of 4x100 only do it for offroad. Your putting a standard wheel on a metric hub.
The worst part is the availability and choices in the 4 on 100 at least from what I've seen. I'm used to modifying the larger diesel trucks but not these mini's but I'm enjoying it so far.
4 x 100 on my '99 Carry. I found a set of 13" Honda Accord rims with good M&S tires for $100 at a local junkyard that bolted right up.
bolt patterns Hi all. I just bought a 92 Carry and I'm learning alot on this site. Thanks eneryone. I wish I would of found this site before I bought. I thought it would be simple just to put some atv wheels and tires on and it would make a great side by side. But after finding out the problems you can get into when it comes to putting a lift kit on which you have to do in order to put 25" tires on. But i think if I keep reading on here someone with help. I also found this site that might help people to find rims to fit their trucks. http://mechdb.com/index.php/Wheel_bolt_patterns Thanks everyone again
I'm looking for some 12" 4x100 ATV wheels for my '99 Carry (no lift) so I can do some mudding. Does anyone know what offset I need?
For those that are interested...I have a 95 Suzuki Carry with a 4x100 bolt pattern. I found rims at Walmart (13" black steel part # X99108 5" wide)with 4x100 bolt pattern. They were $37.97 each. For tires I got some Douglas Track II 155/80R13 all seasons. They were $37.77 each (with tire tax, installation, balancing plus GST $59 each) I know these will not be the best off road wheel/tire combo but most of my driving will be on pavement and that should do nicely. They fit well without any clearance issues and the offset seems to be perfect.
2006 SUZUKI Anyone tried the Vison Lockout Wheels in 4/100 have a set of Ceros 23's looking for a set of wheels been looking high and low most aren't really 4/100 like they advertise any help appreciated. Thanks COOLs DFW Texas
